Gpc

gpc@gnu.de

5400 discussions

Re: compiler bug
by Theo Carr-Brion 12 Oct '01

12 Oct '01

The problem seems to be a general one with variables of Array[AType] of String(Capacity) which we use quite a lot. The capacity of the string if not always set. Sometimes it works and sometimes it does not and I can't find the pattern. Setting the capacity of each string in the program gets round the problem. Theo Carr-Brion

2 1

install-gpc-binary
by HARIKRISHNA Kocheralkota 08 Oct '01

08 Oct '01

Hello, The tarball of gpc binary distribution is containing a file "gpcpp", in the lib/gcc-lib/sparc-sun-solaris2.6/2.95.3/ directory, where as the "install-gpc-binary" script from gpc site is checking for 'gpc-cpp'. we are running the 'install-gpc-binary' file contained in /gcc-2.95.3/gcc/p/script, instead of the same available on gpc site. We are facing no problem. Is it OK ? Thanks and Regards hari

2 1

gpc install problem on cygwin-w98
by Per Persson 07 Oct '01

07 Oct '01

Hello! I have tried to compile gpc-20010924 on a cygwin system (windows-98 Pentium 2). I think I follow the instructions in the Install file thoroughly but the compilation fails. The configuration seems to work without problems (I get promped for the patch for gpc-2.1; I use the gcc-core-2.95.2 source found at the gnu-home-site) After a few seconds of make, however I get: gcc -c -DHAVE_CONFIG_H -g -O2 -I. -I/home/Persson/gnucomplers/gcc-2.95.2/lib iberty/../include /home/Persson/gnucomplers/gcc-2.95.2/libiberty/strerror.c /home/Persson/gnucomplers/gcc-2.95.2/libiberty/strerror.c:461: conflicting t ypes for `sys_errlist' /usr/include/sys/errno.h:23: previous declaration of `sys_errlist' make[1]: *** [strerror.o] Error 1 make[1]: Leaving directory `/home/Persson/gnucomplers/gpc-gcc-build/libibert y' make: *** [all-libiberty] Error 2 I use the 'present' version of cygwin with the following setup.log file: 2001/09/29 16:38:34 Starting cygwin install, version 2.78.2.9 Current Directory: C:\user-pgm\install_files\cygwin source: from cwd Selected local directory: C:\user-pgm\install_files\cygwin root: C:/cygwin binary system Installing...latest/ash/ash-20010827-1.tar.bz2 Installing...latest/autoconf/autoconf-2.52-1.tar.bz2 Installing...latest/automake/automake-1.5-1.tar.bz2 Installing...latest/bash/bash-2.05-8.tar.bz2 Installing...latest/binutils/binutils-20010914-2.tar.bz2 Installing...latest/bison/bison-1.28-1.tar.gz Installing...latest/byacc/byacc.tar.gz Installing...latest/bzip2/bzip2-1.0.1-6.tar.gz Installing...latest/clear/clear-1.0.tar.gz Installing...latest/cpio/cpio-2.4.2.tar.gz Installing...contrib/cron/cron-3.0.1-5.tar.bz2 Installing...latest/crypt/crypt-1.0-1.tar.gz Installing...latest/ctags/ctags-5.0.1-1.tar.gz Installing...contrib/cvs/cvs-1.11.0-1.tar.gz Installing...latest/cygrunsrv/cygrunsrv-0.94-1.tar.bz2 Installing...latest/cygwin/cygwin-1.3.3-2.tar.bz2 Installing...latest/dejagnu/dejagnu-20010117-1.tar.gz Installing...latest/diff/diff.tar.gz Installing...latest/expect/expect-20010117-1.tar.gz Installing...latest/file/file-3.33-1.tar.gz Installing...latest/fileutils/fileutils-4.1-1.tar.bz2 Installing...latest/findutils/findutils.tar.gz Installing...latest/flex/flex-2.5.4-1.tar.gz Installing...latest/gawk/gawk-3.0.4-1.tar.gz Installing...latest/gcc/gcc-2.95.3-5.tar.bz2 Installing...latest/gdb/gdb-20010428-1.tar.gz Installing...contrib/gdbm/gdbm-1.8.0-3.tar.gz Installing...contrib/gettext/gettext-0.10.38-2.tar.bz2 Installing...contrib/ghostscript/ghostscript-6.51-1.tar.bz2 Installing...latest/gperf/gperf.tar.gz Installing...latest/grep/grep-2.4.2-1.tar.gz Installing...latest/groff/groff-1.16.1-1.tar.gz Installing...latest/gzip/gzip-1.3-1.tar.gz Installing...latest/inetutils/inetutils-1.3.2-14.tar.gz Installing...contrib/irc/irc-20010101-1.tar.gz Installing...contrib/jbigkit/jbigkit-1.2-4.tar.bz2 Installing...contrib/jpeg/jpeg-6b-4.tar.gz Installing...latest/less/less-358-3.tar.gz Installing...contrib/libpng/libpng-1.0.11-1.tar.gz Installing...latest/login/login-1.4-2.tar.gz Installing...contrib/lynx/lynx-2.8.4-1.tar.bz2 Installing...latest/m4/m4.tar.gz Installing...latest/make/make-3.79.1-4.tar.bz2 Installing...latest/man/man-1.5g-2.tar.gz Installing...latest/mingw/mingw-20010917-1.tar.gz Installing...latest/mingw-runtime/mingw-runtime-1.1-1.tar.bz2 Installing...latest/mt/mt-1.9.2-1.tar.bz2 Installing...contrib/mutt/mutt-1.2.5i-4.tar.bz2 Installing...contrib/ncftp/ncftp-3.0.2-2.tar.gz Installing...latest/ncurses/ncurses-5.2-5.tar.gz Installing...latest/cygwin/newlib-man-20001118.tar.gz Installing...latest/opengl/opengl-1.1.0-5.tar.gz Installing...latest/openssh/openssh-2.9p2-3.tar.bz2 Installing...latest/openssl/openssl-0.9.6b-1.tar.bz2 Installing...latest/patch/patch-2.5-2.tar.gz Installing...latest/pcre/pcre-3.4-2.tar.gz Installing...contrib/perl/perl-5.6.1-2.tar.bz2 Installing...contrib/popt/popt-1.6.1-1.tar.gz Installing...contrib/postgresql/postgresql-7.1.3-1.tar.bz2 Installing...contrib/python/python-2.1.1-2.tar.bz2 Installing...contrib/readline/readline-4.2-3.tar.bz2 Installing...latest/regex/regex-4.4.tar.gz Installing...contrib/rsync/rsync-2.4.6-2.tar.bz2 Installing...contrib/rxvt/rxvt-2.7.2-6.tar.gz Installing...latest/sed/sed-3.02-1.tar.gz Installing...latest/sh-utils/sh-utils-2.0-2.tar.gz Installing...contrib/squid/squid-2.4-STABLE20010508.tar.gz Installing...contrib/ssmtp/ssmtp-2.38.7-2.tar.gz Installing...latest/tar/tar-1.13.19-1.tar.gz Installing...latest/tcltk/tcltk-20001125-1.tar.gz Installing...contrib/tcsh/tcsh-6.10.00-3.tar.gz Installing...latest/termcap/termcap-20010825-1.tar.bz2 Installing...contrib/tetex/tetex-beta-20001218-1.tar.gz Installing...latest/texinfo/texinfo-4.0-4.tar.gz Installing...latest/textutils/textutils-2.0-2.tar.bz2 Installing...contrib/tiff/tiff-3.5.6beta-2.tar.gz Installing...latest/time/time.tar.gz Installing...contrib/unzip/unzip-5.41-1.tar.gz Installing...latest/vim/vim-6.0-1.tar.bz2 Installing...latest/w32api/w32api-1.1-1.tar.bz2 Installing...contrib/wget/wget-1.6-1.tar.gz Installing...latest/which/which-1.4.tar.gz Installing...contrib/xpm-nox/xpm-nox-4.1.0-1.tar.bz2 Installing...contrib/zip/zip-2.3-1.tar.gz Installing...latest/zlib/zlib-1.1.3-6.tar.gz mbox note: Installation Complete 2001/09/29 16:51:41 Ending cygwin install What is wrong? Should I use another setup for Cygwin? Can my djgpp-installation cause problem (I have removed the 'djgpp-path' part of my autoexec.bat file temporarily) Per _________________________________________________________________ HÃ¤mta MSN Explorer kostnadsfritt pÃ¥ http://explorer.msn.se

2 1

gpc-20010924 and make install bug
by Russell Whitaker 06 Oct '01

06 Oct '01

Hi built gpc same way as always ( no CVS ) and gpc -v gives Reading specs from /usr/local/lib/gcc-lib/@target_alias@/2.95.3/specs gpc version 20010924, based on 2.95.3 20010315 (release) As is, test fails miserably. quick kludge: found cp -r \@target_alias\@/* i586-pc-linux-gnu works. the i5 etc directory is where everything should have been. then test results are: tests 1763 pass 1762 skip 1 fail 0 russ

2 2

(no subject)
by Alan Sun 05 Oct '01

05 Oct '01

Dear sir: I've got a problem when I was installing gpc. The instruction told me to run the following command: configure --enable-languages=pascal, but I cannot find an executable file such as configure.exe, and I have read the help entirely but I still don't know where I can get it. Please help me! Thanks. yours, Alan Sun

3 2

Re: copying gpc built on one machine to another
by ANURADHA Srinivasan 05 Oct '01

05 Oct '01

Hello, I am able to build the zipped gpc binary file and when i run it in another machine , it works. But i would like to add the "sysutils.pas" to the units and the corresponding "*.inc" to say,a separate directory "include" in the build directory and then "mak" the binary. * I am able to add the sysutils to the units directory of the tar.gz file but how do i add the "include" in the binary .tar.gz file?This is the first problem. * Second is , when i gunzip and use it in another directory with this sysutils also zipped,it says "-f-extended-syntax and -Wno-warnings unknown".this doesnot happen when i build the binary without the sysutils added to the units directory. How do i add such files to the tar.gz then? Regards, Anu ANURADHA Srinivasan wrote: > Hello, > > The problem was i had done the configure and make in the source directory. > I see the gcc directory after i gave them in build directory. > The make pascal.bindist runs fine with GNU tar. > It stops with an error saying that it cannot remove the 'tmp' directory.I find > that it is the last statement in the makefile for the above command and so am > going to use the .gz that's created. > Thanks for the support. > > Regards, > Anu > > ANURADHA Srinivasan wrote: > > > Hello , > > > > Two problems : > > 1.I don't get a gcc directory in my gp-buil directory. > > 2.I called make pascal.distbindist in gpc-source\gcc and i get this error. > > make[1]: Leaving directory `/home/users/anuradas/gpcsrc/gcc-2.95.3/gcc' > > tar: /dev/rmt/0: Permission denied > > make: *** [pascal.bindist] Error 1 > > > > Can somebody tell me what the problem could be? > > Thank you. > > Regards, > > Anuradha > > > > > > > > Frank Heckenbach wrote: > > > > > > > ANURADHA Srinivasan wrote: > > > > > > > > > Hello , > > > > > > > > > > Suppose i build GPC on one Sun-solaris 2.6 machine and i copy the > > > > > built GPC to another sun-solaris 2.6 machine , it doesnot work.It says > > > > > gpc-ccp not installed properly. > > > > > > > > You need to copy the complete installation (not just the gpc > > > > executable), try `make pascal.bindist'. > > > > > > > > Also, you'll have to install it in the same directory on the target > > > > machine that it was configured for, or set some environment > > > > variables (see the install-gpc-binary script). > > > > > > > > Frank > > > > > > > > -- > > > > Frank Heckenbach, frank(a)g-n-u.de, http://fjf.gnu.de/ > > > > GPC To-Do list, latest features, fixed bugs: > > > > http://agnes.dida.physik.uni-essen.de/~gnu-pascal/todo.html > > > > > > -- > > > S.Anuradha > > > Generic Data Tools, > > > Alcatel Chennai. > > > Alcanet : 2-757-7123 > > > > -- > > S.Anuradha > > Generic Data Tools, > > Alcatel Chennai. > > Alcanet : 2-757-7123 > > -- > S.Anuradha > Generic Data Tools, > Alcatel Chennai. > Alcanet : 2-757-7123 -- S.Anuradha Generic Data Tools, Alcatel Chennai. Alcanet : 2-757-7123

3 2

(no subject)
by Alan Sun 05 Oct '01

05 Oct '01

Dear sir: I've got a problem in running GPC. I really don't know if it is a bug but the fact is that my GPC cannot compile any program. my program is: program er; var a: integer; begin a := 2; writeln(a); end. The reaction of GPC is gpc1.exe: Invalid option `-famtmpfile=e:/djgpp/tmp\ccaaaaaa.gpc' and the version of my GPC is gpc version 19990510, based on gcc-2.8.1 (the file I downloaded is gpc-19990607-djgpp.zip) Please help me to solve the problem. Thank you! yours, Alan Sun

1 0

Unit for internationalization (i18n) ANNOUNCEMENT
by Eike Lange 05 Oct '01

05 Oct '01

Welcome to the wonderful world of INTERNATIONALIZATION (i18n). This unit provides the powerful mechanism of national language support by accessing .mo files. It includes: locales (not xlocales, because its just 'draft') and libintl. Actually, there are no tools available, so you have to create your .po files by hand. See documentation for gettext ('info gettext') for details. You can download the actual sources via ftp from: agnes.dida.physik.uni-essen.de/pub/home/lange/ Filename is inter-20011005.tar.gz Missing is a tool for creating .po files out of .pas files (like 'xgettext'). Are YOU interested? 2001-10-05 Eike Lange

1 0

Re: copying gpc built on one machine to another
by ANURADHA Srinivasan 05 Oct '01

05 Oct '01

Hello, The problem was i had done the configure and make in the source directory. I see the gcc directory after i gave them in build directory. The make pascal.bindist runs fine with GNU tar. It stops with an error saying that it cannot remove the 'tmp' directory.I find that it is the last statement in the makefile for the above command and so am going to use the .gz that's created. Thanks for the support. Regards, Anu ANURADHA Srinivasan wrote: > Hello , > > Two problems : > 1.I don't get a gcc directory in my gp-buil directory. > 2.I called make pascal.distbindist in gpc-source\gcc and i get this error. > make[1]: Leaving directory `/home/users/anuradas/gpcsrc/gcc-2.95.3/gcc' > tar: /dev/rmt/0: Permission denied > make: *** [pascal.bindist] Error 1 > > Can somebody tell me what the problem could be? > Thank you. > Regards, > Anuradha > > > > > Frank Heckenbach wrote: > > > > > ANURADHA Srinivasan wrote: > > > > > > > Hello , > > > > > > > > Suppose i build GPC on one Sun-solaris 2.6 machine and i copy the > > > > built GPC to another sun-solaris 2.6 machine , it doesnot work.It says > > > > gpc-ccp not installed properly. > > > > > > You need to copy the complete installation (not just the gpc > > > executable), try `make pascal.bindist'. > > > > > > Also, you'll have to install it in the same directory on the target > > > machine that it was configured for, or set some environment > > > variables (see the install-gpc-binary script). > > > > > > Frank > > > > > > -- > > > Frank Heckenbach, frank(a)g-n-u.de, http://fjf.gnu.de/ > > > GPC To-Do list, latest features, fixed bugs: > > > http://agnes.dida.physik.uni-essen.de/~gnu-pascal/todo.html > > > > -- > > S.Anuradha > > Generic Data Tools, > > Alcatel Chennai. > > Alcanet : 2-757-7123 > > -- > S.Anuradha > Generic Data Tools, > Alcatel Chennai. > Alcanet : 2-757-7123 -- S.Anuradha Generic Data Tools, Alcatel Chennai. Alcanet : 2-757-7123

3 6

gpc-20010924 configure problem
by Pierre Muller 04 Oct '01

04 Oct '01

I am trying to generate a gpc binary for cygwin. For this I downloaded the gpc-20010924.tar.gz sources, as well as the gcc-core-2.95.2.tar.gz from the same ftp server. After unpacking both files, I moved p directory into gcc-2.95.2 dir as stated in the INSTALL file. Then I created a directory called gpc-cygwin-build in gcc-2.95.2 directory, moved into that directory and gave ../configure --enable-languages=pascal as said in the INSTALL. But this did not give the expected result: according to INSTALL the configure script should have asked me if I wanted to patch gcc sources, but the whole configure process ended without any question. The generated Makefile only contained LANGUAGES="c c++" lines.... Did I forget to do something before running configure ? Is this a problem with case sensitiveness of environment variables ? i.e. should I rather use --enable-LANGUAGES=pascal I tried this out, but the main Makefile still looks the same and no file was patched. I don't understand how configure should be aware of the fact that it should patch gcc sources ? All is in the p subdir, but that subdir does not even seem to be read.... Pierre Muller Institut Charles Sadron 6,rue Boussingault F 67083 STRASBOURG CEDEX (France) mailto:muller@ics.u-strasbg.fr Phone : (33)-3-88-41-40-07 Fax : (33)-3-88-41-40-99

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

Gpc